Home       Favorite
Home    |     About  Us    |     Products    |     Quality System    |     Marketing    |     Online Enquiry    |     Contact  Us    |    
∶Deep Groove Ball Bearing
∶Self-Aligning Ball Bearing
∶Angular Contact Ball Bearing
∶Thrust Ball Bearing
∶Tapered Roller Bearing
∶Spherical Roller Bearing
∶Cylindrical Roller Bearing
∶Spherical Roller Thrust Bearing
∶Pillow Block Bearing
∶Plummer Block
∶Needle Roller Bearing
∶Spherical Plain Bearing
∶Rod End
∶Linear Ball Bearing
∶Agricultural Bearing
∶Full Ceramic Bearing
∶Auto Bearing
∶Steel Ball
Spherical roller bearings are principally provided with two rows of symmetrical spherical rollers and a common sphere raceway in outer ring. The two inner ring raceways are included at an angle to the bearing axial. The bearings have good self-aligning ability and can operate when the shaft deflection under load or the shaft misalignment in mounting, and their permissible aligning angle is 1 to 2.5 degree. This type of bearings has heavy load carrying capacity and anti-impact ability. In addition to radial loads, they also can carry axial loads in two directions. In general, bearings of this type permit a low limiting speed. TIK spherical roller bearing has cylindrical and tapered bore types available. The tapered bore angle for 240 & 241 series are 1:30 (bearing no. with suffix K30), while for others are 1:12 (bearing no. with suffix K). Brass or pressed steel cages can be provided upon request. Bearing with suffix "W33" indicates there are lubricating groove and 3 lubricating holes on the outer ring.
22200 Series 22300 Series 21300 Series 23000 Series
23100 Series 23200 Series 23900 Series 24000 Series
24100 Series
Copyright ©2005 TIK Bearing Manufacturing Co., Ltd. All Rights Reserved.